Custom Designed Grates and Floors
Request a QuoteWe design and fabricate new, replacement, and custom designed Grates and Floors. Should you have a need for this item, we can accommodate your requirements. We will work with you to assure that the Grates and Floors will be appropriate for your application and conform to the contour of your boat as we have for other satisfied customers. Please use the on-line contact form, send an email APCustomTeakLLC@gmail.com, or give us a call (813) 843-9721 to set up an appointment to discuss your application and to obtain an estimate. Below are several examples of our work applicable from small power boats to larger yachts which are available only via special order.
Main Grates and Floor Styles
1.Original Style
Fabricated out of solid teak planks 1” wide and 1” thick. Cut and assembled “crown to crown” with waterproof glue. Solid teak boarders minimum 2” wide and 1” thick attached on the sides with splines and G-Flex Epoxy.
Penetrating oil can be applied (optional).
2. Navy Style
Fabricated out of solid teak planks 1” wide and 1 ½” thick. Cut and assembled “crown to crown” with waterproof glue. Solid teak boarders minimum 2” wide and 1 ½” thick attached on the sides with splines and G-Flex Epoxy.
Penetrating oil can be applied (optional).
3. Deck Style
Fabricated out of solid teak planks 1 ¼”” wide and 2” thick. Cut and assembled “crown to crown” with waterproof glue. Solid teak boarders minimum 2” wide and 2” thick attached on the sides with splines and G-Flex Epoxy.
Penetrating oil can be applied (optional).
4. European Style
Fabricated out of solid teak planks ¾”” wide and ¾”- 1” thick. Cut and assembled “crown to crown” with waterproof glue. Solid teak boarders minimum 2” wide and ¾”- 1” thick attached on the sides with splines and G-Flex Epoxy.
Penetrating oil can be applied (optional).
5. Plank Style
Fabricated out of solid teak planks 1”-2” wide and 1”-1 ½” thick and solid teak spacers ¼” wide and ¾”-1 ¼” thick. Assembled with stainless steel screws and waterproof glue. Solid teak boarders minimum 1” wide and 1”-1 ½” thick attached on the sides with stainless steel screws and waterproof glue.
Solid teak stringers minimum 2” wide and ¾”-1” thick can be attached on the bottom for additional structural support (optional).
Penetrating oil can be applied (optional).
Grates and Floors Options and Upgrades
1. Interlocking
2. With Risers
Grates and Floors Gallery
marine teak grates-2
marine teak grates
marine teak grates-4
marine teak grates-3
Grate Style Table Top Folding
marine teak louver doors-7
